Here we’re going to disassemble an Antminer S17/ S17 Pro to get to its control board.
Tools required:
1. Cross Screwdriver
2. Hexagon screwdriver
Attention!
Power off the miner during this process
Antminer S17/ S17 Pro Control Board Dissemble Procedure:
1. Remove the six screws on the top of the control board.
2. Remove the case.
3. Uplug the cables.
4. Remove the screws as marked.
5. Lift the control board.
Front Panel
Control Board Reverse
Here is the video of how to disassemble control board from your ANTMINER S17/S17Pro in detailed.
